Do-it-yourself headboard: simple workshops and the most stylish ideas

One of the main rooms in each house is the bedroom. It is intended not only for relaxation, but also for the restoration of strength. Therefore, it is very important that everything is as comfortable as possible, beautiful and thought out to the smallest detail. As for the additional decor, it does not have to be much at all. Therefore, we propose to make a stylish headboard for the bed, which will become a kind of accent in the room.

Cardboard headboard: workshop

For those who are looking for the easiest way to create a headboard, we recommend paying attention to cardboard, as a base material. Despite the fact that it is thin, such a design looks very nice and concise.

Necessary materials:

• cardboard sheets - 2 pcs.;
• Double-sided tape;
• non-woven;
• glue in a spray;
• PVA glue;
• fabric with a pattern;
• plain fabric;
• ruler;
• pencil;
• stationery knife;
• round capacity.

On the first sheet of cardboard we draw the contours of the head of the smaller size. In this case, there are rounded parts. To make them symmetrical and even, we recommend that you simply circle a round container.

Cut the workpiece using scissors or a clerical knife. We put it on the second sheet of cardboard. We retreat a few centimeters on each side and draw the outline of the part. Carefully cut another workpiece.

The result should be two blanks, as shown in the photo.

On the working surface we put non-woven, and on top of a larger cardboard. We add a few centimeters on each side as allowances, and cut the rest. We connect the parts together with glue in the spray.

Using the same principle, we cut off a plain fabric and glue it on top of the non-woven fabric.

At the corners, cut the lined fabric, as shown in the photo. It is very important to cut so as not to reach the edge of the cardboard.

Gently wrap the non-woven fabric with fabric and fix them on cardboard with double-sided tape. Repeat the same with the second blank. But for her we use fabric with a pattern.

We glue the blanks together and leave them for several hours.

On the inside of the head of the head we attach a double-sided tape and fix the structure to the wall.

Stylish, but at the same time, budget headboard for the bed is ready! If desired, you can lay out decorative pillows with a similar print so that everything looks as harmonious as possible.

Do-it-yourself soft headboard for the bed

Lovers of laconic interior should not make too complicated, bulky headboard for the bed. Much more relevant will be a monophonic soft design.

We will prepare such materials:

• plywood sheet;
• furniture stapler;
• batting;
• nails or furniture buttons;
• dense fabric;
• spray glue;
• scissors;
• roulette;
• pencil;
• ruler;
• hammer;
• a thread;
• wall mounts.

From a sheet of plywood, cut a rectangle that is suitable in size.

On top of it we place several layers of batting, taking into account the allowances on each side.

Apply glue to the plywood sheet and fix the first layer of batting. We repeat the same with the rest.

On the back of the workpiece we fix the batting with a furniture stapler.

Turn the workpiece over. Cut the fabric of the required size. On one side we spray glue on the batting and immediately apply fabric to it. Smooth it as much as possible so that the surface is even. Repeat the same until we glue all the fabric.

Leave the workpiece to dry for several hours. Then we fix the fabric on the corners of the headboard to the plywood with a furniture stapler.

At this point you can finish. But we suggest adding a laconic decor to the headboard. To do this, make a mark on each corner, as shown in the photo.

We drive in a nail, according to the mark and tie a thread around it. We pull it and tie it around the second. We do the same on every corner.

Along the line we make marks where it will be necessary to hammer in nails or furniture buttons for decor.

Hammer nails or buttons around the perimeter.

We fix the stylish headboard to the wall using special fasteners.

Imitation tile headboard

Of course, there are many simple options on how to make a headboard. But if you have time, then be sure to try to implement the idea from this master class. After all, such a headboard looks amazingly beautiful.

In the process, we will need the following:

• blanks from plywood of the same size;
• glue;
• the cloth;
• plywood sheet;
• scissors;
• synthetic winterizer;
• furniture stapler.

Based on the size of the plywood blanks, we cut the fabric into equal squares, taking into account the allowances for each side.

We put a piece of fabric on the working surface and place a sheet of plywood on top.

We connect the parts together with a furniture stapler, but only on one side.

We bend the corner, stretch the fabric and fix it with a stapler.

We fill the workpiece with a synthetic winterizer so that a slide forms.

We turn over the workpiece and fix the remaining sides of the fabric with a stapler.

Repeat the same for each square of plywood.

On the working surface we put a sheet of plywood, which will be the basis of the head. Glue all the blanks to it as close to each other as possible.

We install the structure and attach it to the bed.

Bed with headboard in the interior

Of course, a bed with a headboard looks much more attractive. In addition, due to this, it becomes even more convenient and practical in everyday life.

By the way, the headboard does not have to be made of classic materials. The painted options look quite original or with an accent from the wallpaper.

More courageous and active people often choose a headboard from unusual materials.

As you can see, even the simplest interior looks completely different if you use original objects. In the selection of photographs one cannot but notice that very often unusual materials or wallpapers are used as the headboard, which looks interesting and new in its own way. Therefore, choose the option that is most suitable for you and boldly implement ideas.

Watch the video: 20 Smart DIY Hidden Storage Ideas that Keep Clutter in Check (December 2024).